PROSTHODONTICS - Journal of Prosthodontics

1. Impact of aging on the fracture strength of 3D‐printed fixed implant prostheses: A comparative analysis of monolithic and bi‐layer with or without fiber‐reinforced composite frameworks

   Journal of Prosthodontics, EarlyView.

2. Effects of different 3Y‐TZP nanoparticle concentrations on reinforcing mechanical properties of 3D‐printed resin using stereolithography technology

   Journal of Prosthodontics, EarlyView.

3. Effect of daily immersion of different beverages on the surface roughness and color stability of 3D‐printed denture base resins

   Journal of Prosthodontics, EarlyView.

4. Flexural strength, surface roughness, and color stability of various CAD‐CAM denture teeth materials

   Journal of Prosthodontics, EarlyView.

5. A comparative study of strength and surface properties of permanent 3D‐printed resins with CAD‐CAM milled fixed dental prostheses

   Journal of Prosthodontics, EarlyView.

6. Comparative evaluation of human oral fibroblast proliferation on 3D‐printed zirconia and silicon nitride as new ceramic materials for implant abutment

   Journal of Prosthodontics, EarlyView.

7. Craniofacial anatomical determinants of pediatric sleep‐disordered breathing: A comprehensive review

   Journal of Prosthodontics, EarlyView.

8. Evaluation of thin‐threaded implants primary stability in type IV bone right after maxillary sinus floor elevation: A human cadaver study

   Journal of Prosthodontics, EarlyView.

9. Wettability of saliva substitutes across various denture base fabrication techniques

   Journal of Prosthodontics, EarlyView.

10. Association of edentulism and obstructive sleep apnea: A systematic review

    Journal of Prosthodontics, EarlyView.

11. Changes in facial soft tissue support with and without a maxillary labial flange

    Journal of Prosthodontics, EarlyView.

12. Pterygoid implant‐based maxillary full‐arch rehabilitation using an autonomous robot system: A case report

    Journal of Prosthodontics, EarlyView.

13. Silicone cure inhibition with material jetting additive manufacturing utilized for facial prosthesis fabrication – A clinical report

    Journal of Prosthodontics, EarlyView.

14. Influence of the color of 3D‐printed scan aids on the trueness of complete arch digital scans

    Journal of Prosthodontics, EarlyView.

15. Accuracy of different maxillomandibular relationship recording techniques in the edentulous maxillary arch

    Journal of Prosthodontics, EarlyView.

16. Effect of magnetic resonance imaging protocol on decision‐making for positioning of dental implants in edentulous cases

    Journal of Prosthodontics, EarlyView.

17. Utilization of digitally milled verification jigs for recording jaw relations in complete‐arch implant rehabilitation: A digital clinical report

    Journal of Prosthodontics, EarlyView.

18. Influence of the post‐processing protocol on a biocompatible 3D‐printed resin

    Journal of Prosthodontics, EarlyView.

19. Intraoral scanning for implant‐supported complete‐arch fixed dental prostheses (ISCFDPs): Four clinical reports

    Journal of Prosthodontics, EarlyView.

20. Understanding the clinical management of co‐occurring sleep‐related bruxism and obstructive sleep apnea in adults: A narrative and critical review

    Journal of Prosthodontics, EarlyView.

21. Accuracy of intraoral versus desktop scanners used in digitizing polyvinyl siloxane impression for fabricating a CAD‐CAM customized post and core

    Journal of Prosthodontics, EarlyView.

22. The impact of abutment type on abutment screw removal torque value after experimental aging

    Journal of Prosthodontics, EarlyView.

23. Comparison of trueness, time, and number of images among different denture digitization protocols

    Journal of Prosthodontics, EarlyView.

24. Effect of build orientation on the fabrication trueness of additively manufactured implant‐supported complete arch interim fixed prostheses

    Journal of Prosthodontics, EarlyView.

25. Comparison of denture space and patient satisfaction for neutral zone versus standard‐designed digital dentures restoring mandibular resorbed ridges: A crossover randomized clinical trial

    Journal of Prosthodontics, EarlyView.

26. Influence of nanohydroxyapatite mouthwash on the growth of Candida albicans biofilm on milled denture surfaces: An in vitro study

    Journal of Prosthodontics, EarlyView.

27. Effect of artificial aging and different surface finishing protocols on the flexural strength and surface hardness of a photopolymer for manufacturing monolithic polychromatic complete dentures using PolyJet 3D printing

    Journal of Prosthodontics, EarlyView.

28. Effect of polishing and denture cleansers on the surface roughness of new‐generation denture base materials and their color change after cleansing

    Journal of Prosthodontics, Volume 33, Issue 8, Page 783-790, October 2024.

29. A technique to convert a 3D printed cast used in the fabrication of an interim implant‐supported crown into a definitive cast capturing the acquired emergence profile

    Journal of Prosthodontics, Volume 33, Issue 8, Page 829-832, October 2024.

30. Could various angulated implant depths affect the positional accuracy of digital impressions? An in vitro study

    Journal of Prosthodontics, Volume 33, Issue 8, Page 791-800, October 2024.

31. Effect of different digital technology on the adaptation and retention of Co‐Cr partial denture frameworks

    Journal of Prosthodontics, Volume 33, Issue 8, Page 801-807, October 2024.

32. Assessment of tooth positions of printed complete dentures with different designs and tooth positioning techniques

    Journal of Prosthodontics, Volume 33, Issue 8, Page 808-814, October 2024.

33. Effect of customized abutment taper configuration on bone remodeling and peri‐implant tissue around implant‐supported single crown: A 3D nonlinear finite element study

    Journal of Prosthodontics, Volume 33, Issue 8, Page 815-823, October 2024.

34. A novel technique for CAD‐CAM assisted digital ocular prosthesis

    Journal of Prosthodontics, Volume 33, Issue 8, Page 824-828, October 2024.

35. Implant survival rate and marginal bone loss of 174 implants with different variables associated over a minimum observational period of 20 years: A retrospective study

    Journal of Prosthodontics, Volume 33, Issue 8, Page 764-773, October 2024.

36. Maxillary interim obturator prosthesis fabrication for a patient with limited mouth opening with a digital approach: A clinical report

    Journal of Prosthodontics, Volume 33, Issue 8, Page 725-729, October 2024.

37. Artificial intelligence and smile design: An e‐Delphi consensus statement of ethical challenges

    Journal of Prosthodontics, Volume 33, Issue 8, Page 730-735, October 2024.

38. Impact of vertical alveoloplasty on changes in keratinized mucosa width following full‐arch immediate implant placement and rehabilitations: A prospective case series

    Journal of Prosthodontics, Volume 33, Issue 8, Page 748-756, October 2024.

39. Clinical evaluation of a one‐piece polyetheretherketone removable partial denture fabricated using a novel digital workflow: A self‐controlled clinical trial

    Journal of Prosthodontics, Volume 33, Issue 8, Page 757-763, October 2024.

40. Fracture resistance and failure mode of endodontically treated premolars reconstructed by different preparation approaches: Cervical margin relocation and crown lengthening with complete and partial ferrule with three different post and core systems

    Journal of Prosthodontics, Volume 33, Issue 8, Page 774-782, October 2024.

41. Issue Information ‐ Editorial Board

    Journal of Prosthodontics, Volume 33, Issue 8, Page 723-724, October 2024.

42. Clinical outcomes of milled, 3D‐printed, and conventional complete dentures in edentulous patients: A systematic review and meta‐analysis

    Journal of Prosthodontics, Volume 33, Issue 8, Page 736-747, October 2024.

43. Human gingival fibroblast response on zirconia and titanium implant abutment: A systematic review

    Journal of Prosthodontics, EarlyView.

44. Effectiveness of 2D magnesium phosphate hydrogel for surgical decontamination of dental implants: A case series

    Journal of Prosthodontics, EarlyView.

45. Effect of different preparation designs and material types on fracture resistance of minimally invasive posterior indirect adhesive restorations

    Journal of Prosthodontics, EarlyView.

46. Effect of sintering cycle on the strength and translucency of multilayered zirconia

    Journal of Prosthodontics, EarlyView.

47. Dentoskeletal changes of long‐term oral appliance treatment in patients with obstructive sleep apnea: A systematic review and meta‐analysis

    Journal of Prosthodontics, EarlyView.

48. Repeatability of different mobile phone applications for color measurement in dentistry

    Journal of Prosthodontics, EarlyView.

49. Assessment of different treatment alternatives for patients with total maxillectomy

    Journal of Prosthodontics, EarlyView.

50. Reinforcement of 3D‐printed resins for denture base by adding aramid fibers: Effect on mechanical, surface, and optical properties

    Journal of Prosthodontics, EarlyView.